Buxton Special Alloys Logo BSA

Re-Forging Billet

We stock forged and re-rolled Stainless Steel, Duplex, Super Duplex and Nickel Alloy billets in various grades with certified chemical analysis. Billets are UT inspected, and are supplied fully ground and clean ended. They can also be supplied cut to customer requirements.

Our stock sizes range from 80mm to 600mm round and square, with lengths up to 8 metres.

Cut Pieces

We currently operate four fully automated saws enabling us to cut up to 600mm in diameter.

Our saws are currently operating 24 hours a day, 7 days a week, enabling us to supply express deliveries.


Buxton Special Alloys have long term partnerships with a number of Forging companies throughout Europe. We have the ability to supply open die, closed die and ring rolled forgings up to 15 metric tons starting weight. We collaborate with numerous mills who have decades of experience in oil and gas, nuclear and sub-sea.


Our Rings are produced from bars and proof machined to customer drawings. Positioned in the heart of Sheffield we have a wealth of experienced subcontract machine shops, enabling us to supply Rings with very quick deliveries and offer the customer a product close to their finished requirement.

We offer Rings from 60mm to 600mm in diameter machined from solid bars with a minimum wall thickness of 10mm.

We can also offer part finished machined to customer drawings.


Rolled & Forged Bar

Buxton Special Alloys holds a wide variety of stock in Stainless Steel, Duplex, Super Duplex, Nickel Alloys and some Carbon Steels. Our stock ranges from 80mm to 600mm in diameter with 3.1/3.2 certification, rolled/forged and Peeled/Turned.

Our key stock grades are F51, F55, F53, F44, UNS 32550, 17-4ph, XM19, Alloy 20, Alloy 825, Alloy 625, and many other grades. Our Duplex and Super Duplex grades are all supplied under the Norsok approval.

Our extensive knowledge of the market supported by our strong partnerships with mills enables us to supply grades that are not readily available from stock at competitive prices.

Machined Components

We are committed to offering the customer as close to their finished product as possible and we now offer machined components. We are producing manifolds for large oil and gas sub contractors, down hole tooling and various other machined parts for different industries.

Honed and Hollow Bars

Hollow Bored Bars are machined from solid, enabling us to control the wall thickness. We can produce various sizes up to 600mm in diameter with 12mm minimum wall thickness. Depending on the diameter we can machine up to 6 meters in length. We can also offer a honed finish on the inside diameter of the tubes.

Bored and Honed Hollow Bored Bars, are available in our stock and are tough manufactured to close concentricity and straightness tolerances.


Buxton Special Alloys also has long term relationships with a number of flange manufacturers from all over the world. We have the ability to supply all kinds of flanges in short deliveries.

Material Standards:


Dimensional Standards:

ASME B16.5, B16.36, B16.47, B16.48, AWWA, DIN
DIN EN ISO 9001:2000, DIN / EN 1092, certified by TüV, TOTAL, GL, DNV, PED,  BV, Saudi Aramco, PDO, KOC, Shell, EIL.

Size and Pressure Class Abilities

DN 10 - DN 2200" | 2627 - 2638 | 2527 /
PN 6 - PN 400

Size and Pressure Class Abilities ASME B16.5

1/2" thru 102" | 150# | 300# | 600# | 900# | 1500# | 2500#


Buxton Special Alloys Logo BSA

(c) 2022 Buxton Special Alloys Ltd.

Buxton Special Alloys Logo BSA
Buxton Special Alloys Logo BSA

Buxton Special Alloys Logo BSA
Buxton Special Alloys Logo BSA

Buxton Special Alloys Logo BSA